Description
Leaf former
Code: P.502.159.SEMI
Use
For the production of standardized laboratory hand sheets according to TAPPI.
Device description
The semi-automatic TAPPI sheet former is specially designed for the simple and practical production of laboratory hand sheets with a diameter of 159 mm (other sizes available on request). The shaping column and the coagulation device are located on the left-hand side of the waterproof worktop. An easily accessible switch panel is installed next to it for quick changeover to manual operation. The control module above it contains an easy-to-operate touch display with pre-installed PTE Austria software, easy-to-read pressure indicators and the easily accessible emergency and ON/OFF switch. The program automatically controls the sheet forming process and even the coagulation process can be carried out ergonomically with the coagulation device.
Features
- Highest quality in material and production
- Only corrosion-free materials
- Easy to operate via touchscreen
- Semi-automatic process
- Gravitational drainage
- Pneumatic whirling
- Pneumatic slide-off
- Switching to manual mode possible at any time
Applicable standards
TAPPI T205; ISO 5269/1; SCAN C26
Connections
| Voltage | 230 V, 50 Hz AC |
|---|---|
| Compressed air | 400 – 600 kPa |
| Water supply | Water connection required |
| Drain | Ø 50 mm drain pipe |
Models
| Code | Model |
|---|---|
| P.502.159.SEMI | TAPPI semi-automatic built into the laboratory bench |
| P.502.159.BOX | TAPPI semi-automatic with wall-mounted control box for installation in existing laboratory bench |