Description
Code: P.216.xxx
Use
For preparing corrugated samples for the Concora Medium Test (CMT) and the edge crush resistance test (CCT).
Device description
The Concora shaft former consists of a main housing containing the motor and the controls, and an additional housing with a protective cover containing the segments. The temperature of the segments can be set up to 200°C (standard: 175°C ± 5°C) using the controls and digital display on the main housing. The segments are only heated directly with 200 W and pressed against each other with a force of 100 N ±10 N. To prepare a wave sample, a sample strip is inserted via the sample feed on the top of the machine and can be removed from the easily accessible collecting container after wave formation. The segments can be easily exchanged using a special quick-clamping device.
Features
- Highest quality and workmanship
- Digital temperature display
- Precise temperature distribution on the segments
- Spring balance for force control
- CE certified
Applicable standards
ISO 7263; TAPPI T809; SCAN P27; PAPTAC D29; APPITA/AS 1301.434s
Specifications
Spannung | 110 - 230 V, 50/60 Hz AC |
Connections
Code | Beschreibung |
P.216 | Concora Wellenbildner ohne Segmente |
P.216.SEG-A | Segment »A« mit dritter Hand & Reibblock |
P.216.SEG-B | Segment »B« mit dritter Hand & Reibblock |
P.216.SEG-C | Segment »C« mit dritter Hand & Reibblock |
Models
einstellbare Temperatur | bis zu 200°C |
Aufheizung der Segmente | 2 - 3 Min |
Bewegungsgeschwindigkeit der Segmente | 4,5 U/Min |
Anpressdruck | 100 N ± 10 N |