Description
Rapid Köthen drying rack
Code: P.405.Dx
Use
For drying laboratory hand sheets produced using the Rapid Köthen process.
Device description
The Rapid Köthen drying table is built on a torsion-free stainless steel frame. The pump, hot water bath, etc. are located in this robust substructure. The control module with integrated touch display is located on the left-hand side of the worktable, while the dryers are housed on the right-hand side. To provide more working space, only the most essential switches are installed on the table top. The parameters for the drying process can be conveniently controlled via the touchscreen.
Features
- Corrosion-resistant premium materials
- Easy to operate via touchscreen
- Easily accessible main switch
- Air extraction in the dryers via vacuum pump
Applicable standards
ISO 5269-2; DIN 54358
Specifications
| Water circulation | 3-6 l/min according to standard |
|---|---|
| Water temperature | 93 – 97°C according to standard, individually adjustable |
Connections
| Voltage | 400 V, 50 Hz |
|---|---|
| Compressed air | 600 kPa |
| water | 200 kPa |
| Drain | Ø 50 mm drain pipe |
Models
| code | Article |
|---|---|
| P.405.D1 | Drying table with one dryer |
| P.405.D2 | Drying table with two dryers |
| P.405.D3 | Drying table with three dryers |
| P.405.D4 | Drying table with four dryers |
| P.405.D5 | Drying table with five dryers |